The TP-2215-PVD is a single channel unit which combines all CCTV system cabling using standard EIA/TIA 568B ( CAT 5) structured cabling. For use with our PVD units at camera end to carry power and video signal upto 230m.
Supports up coaxial signal upto 225m. Built in transient protection.
find out more
| |
The TP-2215-PV is a single channel unit which combines all CCTV system cabling using standard EIA/TIA 568B ( CAT 5) structured cabling. For use with our PVD units at camera end to carry power and video signal upto 230m.
Supports up coaxial signal upto 225m. Built in transient protection.
find out more
| |
Single channel active ( powered) TRANSMITTER with one BNC input and screw terminal for video output
It has ground lifting circuit ( ground loop isolation) which makes it ideal for use on 3 phase premises.
Requires 24VAC power supply for best results to provide ground lifting or can be used with 12VDC - no ground lifting.
find out more
|
|
600 TV lines ,colour/mono SONY SUPER HAD 1/3" CCD high resolution mini WHITEvandal dome with IR LEDs and 3.6mm Korean lens.Built in 24 LED’s allow the camera to be used in total darkness up to a maximum range of 20 metres. Nextchip 2040 digital signal processing.
find out more
| |
Colour/mono SONY EX-VIEW 1/3 ins CCD high resolution vandal dome with IR LEDs and 2.8~10mm lens. New Sony Effio-E DSP delivering 650 TV lines in colour in 650 TV lines finished in graphite gray.
Digital wide dynamic & 2D digital noise reductions to deliver noise free images even in total darnkess.
Built in 5mm, 36 LED’s allow the camera to be used in total darkness up to a maximum range of 30 metres. The camera is mounted in a robust aluminium housing which incorporates a 3 axis gimbal allowing the camera to be adjusted to any angle. This allows the unit to be wall or ceiling mounted.
Dual glass technology completely eliminates IR LED fogging . P65 rated & suitable for inside or outside use.Focus and zoom can easily be adjusted without opening the casing.
find out more
| |
The TP-1613-PVD is a single unit that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with TP-226C-PVD transceivers for cable runs under 225m (750ft). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, crosswire, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.
find out more
|
|
The TP-813-PVD is a single unit that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with TP-226C-PVD transceivers for cable runs under 225m (750ft). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, crosswire, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.
find out more
| |
The TP-413-PVD is a single unit that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with TP-226C-PVD transceivers for cable runs under 225m (750ft). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, crosswire, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.
find out more
| | |
|
